Loading... Please wait...
Free Delivery

Instructions for Digiz

NOTICE

  1. The watch has a water resistance rating of 5ATM which makes it suitable for swimming but not diving.
  2. Do not press any of the buttons when in water as this could damage the watch.
  3. Be careful with your watch. Dropping it onto hard ground could damage or even break your watch.
  4. Always clean your watch with a soft cloth or clean water if needed.
  5. Do not stretch the wristband too tightly around your wrist. Only tighten to a position that is comfortable.
  6. The coating of the watch may fade or scuff under heavy, long tern use.
  7. The watchband is made from high quality resin. It will age but regular cleaning with a soft cloth and clear water if needed will maintain it in the best possible way.
  8. The watch contains precision parts. Do not attempt to open the case. If a battery change is required we recommend that you take it to a professional battery replacement shop.
  9. The watch, not the strap, is guaranteed for 6 months from the date of purchase.

 

STANDARD DISPLAY AND BUTTON FUNCTION

Operate and adjust the watch according to the following indications on the screen.

SIGN INDICATION/ BUTTON POSITION/FUNCTION

…….....              ALARM ON

A - AM              MORNING TIME 

P - PM              AFTERNOON TIME

L - LIGHT          COOL LIGHT BUTTON (with 3-second delay function)

M - MODE          FUNCTION SELECT BUTTON

S - START          DIGIT ADVANCE BUTTON       DATE DISPLAY BUTTON

         STOP WATCH TIMEKEEPING ON /OFF BUTTON

R- RESET           TIME ADJUST BUTTON          ALARM TIME DISPLAY

 STOPWATCH RESET BUTTON

 

FUNCTION AND SPECIFICATION

  1. Standard display: hour, minute, second, day of week, month, date
  2. Cool light function
  3. Stopwatch function
  4. Alarm function
  5. Sleep function
  6. Hourly chime functionService temperature: -5'C to +35'C
  7. Degree of accuracy at normal temperature: +/-  45 seconds every month
  8. Battery: three colour series using l.5V high-capacity alkaline Zn-Mn button battery.
  9. Life of battery: up to 12 months under normal conditions including 3 seconds of illumination and 60 seconds of alarm every day.

 

OPERATION

Press "M" button, the mode will change in turn as follows:

M*: When operating in "Stopwatch Function Operation Mode" or” Alarm Time Adjust Mode”. If "S" or "R" button was pressed before, pressing the M button will take you directly back to Normal Time Display Mode.

  1. In "Normal Time Display Mode”: press "S" button to display date; press "R" button to display alarm time.
  2. 12/24 Time System Display: in "Normal Time Display Mode”, press "M" three times to enter into "Time Adjust State”, press "R" button twice to enter into "Hour Adjust State”, then press "S" button until 12/24 Time System display on screen, and then press "M" once to go back to "Normal Time Display Mode".
  3. Time/date/week setting: in" Normal Time Display Mode", press "M" three times to enter into "Time Adjust State", the second value blinks, press "S" to adjust second value; press "R" button, the minute value will blink, press "S" to adjust minute value; then press "R" and "S" respectively to adjust hour, date, month, day of week; and then press "M" to go back to normal mode.
  4. Alarm Time Setting: in "Normal Time Display Mode”, press "M" button twice, then press "S" to set the hour value; press "R" once, then press "S" again to set the minute value, press "M" to go back to normal mode.
  5. How to use stopwatch: in "Normal Time Display Mode", press "M" button once to enter into "Stopwatch Function Operation Mode", press "S" button to start timekeeping. Press "S" again to stop timekeeping, the count value will display on the screen: Press "R" button to reset, press "M" button to go back to “Normal Time Display Mode".
  6. How to turn the Alarm on/off ,Hourly Chime function: hold the "R" button, then press "S" to on/off Alarm Function: when "Alarm On”, the signal will display on the screen. When the alarm rings, press "S" to stop ringing, it will ring again after 4-5 minutes, press "R" to stop the ringing. Hold the "R" button, and then press "M". to on/off Hourly Chime Function, when Hourly Chime On. The week will display on screen.
  7. Cool Light Lamp: press "L" button to turn on the cool light with 3-second time delay.

Note: Excessive use of the cool light function will deplete your battery quickly